CONSUMER INFORMATION
111
DISCLAIMER OF CONSEQUENTIAL DAMAGE AND LIMITATION OF IMPLIED
WARRANTIES:
American Honda Motor Co., Inc. and Honda Canada Inc. disclaim any
responsibility for incidental or consequential damages such as loss of time or
the use of the power equipment, or any commercial loss due to the failure of the
equipment; and any implied warranties are limited to the duration of this
written warranty. This warranty is applicable only where the California, U.S. EPA,
or Environment Canada emission control system warranty regulation is in effect.
EMISSION CONTROL SYSTEM WARRANTY PARTS
* Covered up to the first required replacement only.
See the "MAINTENANCE SCHEDULE" on page 66.
SYSTEMS COVERED
BY THIS WARRANTY:
PARTS
DESCRIPTION:
Fuel Metering
Carburetor assembly (includes starting enrichment
system), Oxygen sensor, Throttle body, Engine
temperature sensor, Engine control module, Fuel
injector, Fuel regulator, Intake manifold
Evaporative
Fuel tank, Fuel cap, Fuel lines (for liquid and fuel
vapors), Carbon canister, Canister mounting
brackets, Fuel line fittings, Fuel strainer, Fuel valve,
Fuel pump, Fuel hose joint, Canister purge port
connector
Exhaust
Catalyst, Exhaust pipe, Muffler (with catalyst),
Exhaust manifold
Air Induction
Air cleaner case, Air cleaner element*
Ignition
Flywheel comp., Flywheel magneto, Ignition pulse
generator, Crankshaft position sensor, Power coil,
Ignition coil assembly, Ignition control module,
Spark plug cap, Spark plug*
Crankcase Emission
Control
Crankcase breather tube, Breather valve assembly,
Oil filler cap
Miscellaneous Parts
Tubing, fittings, seals, gaskets, and clamps
associated with these listed systems.
31Z266200.book 111 ページ ２０２０年２月２０日 木曜日 午前１１時１２分
