Installation Notes:
Reverse the removal procedure.
Make sure that the slot (8) on the brake
panel is located in the lug (9) in the
swingarm (10).
Tighten and torque the following nuts
and bolts :
Axle nut torque:
Apply the brake several times and check
for free wheel rotation after the brake
pedal is released.
If a torque wrench was not used for
installation, see your Honda dealer as
soon as possible to verify proper
assembly. Improper assembly may lead to
loss of braking capacity.
Adjust the brake (page
) and drive
chain (page
).
(8)
(9)
(10)
17
72
(8) Slot
(9) Lug
(10) Swingarm
82
88 N·m (9.0 kgf·m , 65 lbf·ft)
02/03/08 19:01:45 32KHA600_092