Honda CRF450X 2020, Owner'S Manual & Competition Handbook

Page: 32 / 204

Braking
24
Basic Operating Instructions
Braking
To slow or stop, apply the front brake lever and
rear brake pedal smoothly, while downshifting to
match your speed. Gradually increase braking as
you feel the brakes slowing your speed. To prevent
stalling the engine, pull the clutch lever in before
coming to a complete stop. For support, put your
left foot down first, then your right foot when you
are through using the rear brake pedal.
For maximum braking, close the throttle and
firmly apply the front brake lever and rear brake
pedal controls.
Applying the brakes too hard may cause the wheels
to lock and slide, reducing control of your CRF. If
this happens, release the brake controls, steer
straight ahead until you regain control, then
reapply the brakes more gently.
Generally, reduce your speed or complete braking
before beginning a turn. Avoid braking or closing
the throttle quickly while turning. Either action
may cause one or both wheels to slip. Any wheel
slip will reduce your control of your CRF.
When riding in wet or raining conditions, or on
loose surfaces, the ability to maneuver and stop
will be reduced. All of your actions should be
smooth under these conditions. Rapid acceleration,
braking, or turning may cause loss of control. For
your safety, exercise extreme caution when
braking, accelerating, or turning.
When descending a long, steep grade, use engine
compression braking by downshifting, with
intermittent use of both brakes.
When you brake to a stop, pull the clutch lever in
before stopping completely to prevent stalling the
engine. For support, put your left foot on the
ground first, then your right foot when you have
finished braking.
31MKE710.book 24 ページ ２０１９年３月１１日 月曜日 午前１０時４７分