Engine Mode Select Button
134
Adjustments for Competition
Engine Mode Select Button
You can change engine output characteristic
depending on track conditions by using the engine
mode select button (1).
• PGM-FI mode 1: standard setting
• PGM-FI mode 2: smooth setting (reduce throttle
response from the standard setting)
• PGM-FI mode 3: aggressive setting (increase
throttle response from the standard setting)
An optional PGM-FI setting tool can change the
ignition timing and amount of the fuel injection
and save the setting data on the PGM-FI mode 2 or
3 (page 171).
Start the engine and push the engine mode select
button (1) with your CRF stopped. The mode
indicator (2) in the engine mode select button
indicate a selected mode by the number of times
the indicator blinks.
1. Start the engine.
2. With your CRF stopped and the throttle closed,
push and hold the engine mode select button
for 1 or more second.
Make sure that the fast idle knob is pushed in
(page 17). If the fast idle knob is pulled out, the
engine mode will not change.
3. Release the engine mode select button. The
mode indicator will indicate a selected mode
by the number of times the indicator blinks.
4. Repeat steps 2 – 3 until the desired mode is
indicated.
(1) engine mode select button
(1)
Current Mode
(1) engine mode select button
(2) mode indicator
(2)
(1)
PGM-FI mode 1:
The indicator blinks
once and repeats it
3 times.
PGM-FI mode 2:
The indicator blinks
2 times and repeats
it 3 times.
PGM-FI mode 3:
The indicator blinks
3 times and repeats
it 3 times.
Mode Selection
PGM-FI mode 1
PGM-FI mode 2
PGM-FI mode 3
