6.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u
Discard the oil and oil filter at an
approved recycling centre.
7.
Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8.
Install the new oil filter and tighten.
Torque:
26 N·m (2.7 kgf·m, 19 lbf·ft)
9.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque:
30 N·m (3.1 kgf·m, 22 lbf·ft)
10.
Fill the crankcase with the recommended
oil (
P. 127) and install the oil fill
cap.
Required oil
When changing oil & engine oil
filter:
2.7 L (2.9 US qt, 2.4 Imp qt)
When changing oil only:
2.5 L (2.6 US qt, 2.2 Imp qt)
11.
Check the oil level.
12.
Check that there are no oil leaks.
20191127100329_32MKGB100_eng_BOOK Page 78 Wednesday, November 27 2019 10:18:24 JST
Engine Oil
u
Changing Engine Oil & Filter
Maintenance
75
Oil filter
Rubber seal
