110 |
| 111
DRIVING
DRIVING
n
Changing Settings
Determine the warning timing.
1. From the HOME screen, select
Settings.
2. Select Vehicle. The vehicle must
be in Park (P).
3. Select Driver Assist System Setup.
4. Select Forward Collision Warning
Distance.
5. Select Long, Normal, or Short.
6. Press BACK to exit the menu.
Important Safety Reminder
CMBS is designed to reduce the severity of an unavoidable collision. It does not
prevent collisions nor stop the vehicle automatically. It is still your responsibility
to operate the brake pedal and steering wheel appropriately according to the
driving conditions.
n
Turning CMBS On or Off
Press and hold the CMBS OFF button.
A beep sounds and a message
appears in the MID. The CMBS
indicator appears when the system
is off.
LaneWatch
™
Check the passenger-side rear areas in the upper display when the right turn
signal is activated.
LaneWatch display
n
Activating LaneWatch
Activate the right turn signal. The
LaneWatch display appears. Check
the display for blind spots and visually
confirm that it is safe to change lanes.
You can also press the LaneWatch
button on the end of the turn signal
switch to view a constant real-time
display. Press it again to turn the
display off.
n
Changing Settings
Customize the display and how and when the display appears.
1. From the HOME screen, select
Settings.
2. Select Camera.
3. Select LaneWatch.
4. Select an option and make the
preferred changes.
5. Press BACK to exit the menu.
Important Safety Reminder
Like all assistance systems, LaneWatch has limitations. Over-reliance on the
system may result in a collision.
Failure to visually confirm that it is safe to change lanes before doing so may
result in a crash and serious injury or death.
Do not rely only on LaneWatch while driving. Always look in your mirrors, to
either side of your vehicle, and behind you for other vehicles before changing
lanes.
WARNING