manualshive.com logo in svg

Honda CL500A 2023, Manual

Share
Download
Honda CL500A 2023 Manual Download Page 67

Avoid getting lubricant on the brakes or tyres.

Avoid applying excess chain lubricant to prevent

spray onto your clothes and the vehicle.

Recommended Coolant

ED, KO, U type

Pro Honda HP Coolant is a pre-mixed solution

of antifreeze and distilled water.

Concentration:

50% antifreeze and 50% distilled water

A concentration of antifreeze below 40% will

not provide proper corrosion and cold

temperature protection.

A concentration of up to 60% will provide better

protection in colder climates.

NOTICE

Using coolant not specified for aluminium

engines or tap/mineral water can cause

corrosion.

FO, TH, PH type

Use only genuine HONDA PRE-MIX COOLANT

without diluting with water. Genuine HONDA

PRE-MIX COOLANT is excellent at preventing

corrosion and overheating.

The coolant should be inspected and replaced

properly by following the maintenance

schedule. 

2

P. 52

NOTICE

Using coolant not specified for aluminium

engines or tap/mineral water can cause

corrosion.

20221007115421_32MLPB000_eng_BOOK Page 67 Friday, October 07 2022 11:57:00 JST

Maintenance Fundamentals

Maintenance

64

Summary of Contents for CL500A 2023



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands