Continued
93
uu
Child Safety
u
Safety of Infants and Small Children
Safe Driving
1.
Place the child restraint system on the
vehicle seat.
2.
Route the seat belt through the child
restraint system according to the child
restraint system manufacturer's
instructions, and insert the latch plate into
the buckle.
u
Insert the latch plate fully until it clicks.
3.
Push down the tab. Route the shoulder part
of the belt through the slit at the side of the
restraint.
4.
Grab the shoulder part of the belt near the
buckle, and pull up to remove any slack
from the lap part of the belt.
u
When doing this, place your weight on
child restraint system and push it into the
vehicle seat.
5.
Position the belt properly and push up the
tab. Make sure the belt is not twisted.
u
When pushing up the tab, pull up the
upper shoulder part of the belt to
remove any slack from the belt.
■
Installing a Child Restraint System with a Lap/Shoulder Seat Belt
1
Installing a Child Restraint System with a Lap/Shoulder Seat Belt
A child restraint system that is not properly secured
will not adequately protect a child in a crash and may
cause injury to the child or other vehicle occupants.
Tab
17 CIVIC 5D (KE KG)-32TGG6000.book 93 ページ ２０１７年１０月２０日 金曜日 午前１１時４９分