608
uu
When Driving
u
Adjusting Headlight Distribution
Driving
Adjusting Headlight Distribution
Driving the right-hand type vehicle in right-hand traffic, or the left-hand type vehicle
in left-hand traffic causes headlight glare to oncoming vehicles. You need to alter
the headlight beam distribution using masking tape.
1.
Prepare for two rectangular pieces of masking tape, measuring 40 mm (1.6 in)
wide and 80 mm (3.1 in) long.
u
Use masking tape that can shut out light, such as seal type waterproof vinyl.
2.
Affix the tape to the lens as shown.
Models with LED headlights
1
Adjusting Headlight Distribution
Be careful not to adhere the tape to an incorrect
location. If the headlight beam is distributed
incorrectly, it may not comply with your country’s
legal requirements. Ask your dealer for details.
Centre point
9 mm
(0.4 in)
10 mm
(0.4 in)
40 mm
(1.6 in)
80 mm
(3.1 in)
20 mm
(0.8 in)
11.6 mm
(0.46 in)
R 5 mm
(R 0.2 in)
Centre point
Centre point
Centre point
9 mm
(0.4 in)
10 mm
(0.4 in)
40 mm
(1.6 in)
80 mm
(3.1 in)
20 mm
(0.8 in)
11.6 mm
(0.46 in)
R 5 mm
(R 0.2 in)
17 CIVIC 5D (KE KG)-32TGG6000.book 608 ページ ２０１７年１０月２０日 金曜日 午前１１時４９分