uu
When Driving
u
Adaptive Cruise Control (ACC) with Low Speed Follow (LSF)
*
548
Driving
■
There is a vehicle ahead
ACC with LSF monitors if a vehicle ahead of you enters the ACC with LSF range. If a
vehicle is detected doing so, the ACC with LSF system maintains or decelerates your
vehicle’s set speed in order to keep the vehicle’s set following-interval from the
vehicle ahead.
2
To Set or Change Following-interval
P. 554
When a vehicle whose speed is slower than
your set speed comes in or cuts in front of you
and is detected by the radar and the camera,
your vehicle starts to slow down.
■
When in Operation
1
If the vehicle ahead of you slows down abruptly, or if
another vehicle cuts in front of you, the beeper
sounds, a message appears on the driver information
interface.
Depress the brake pedal, and keep an appropriate
interval from the vehicle ahead.
Even if the interval between your vehicle and the
vehicle detected ahead is short, ACC with LSF may
start accelerating your vehicle under the following
circumstances:
•
The vehicle ahead of you is going at almost the
same speed as, or faster than, your vehicle.
•
A vehicle that cuts in front of you is going faster
than your vehicle, gradually increasing the interval
between the vehicles.
You can also set the system to beep when a vehicle
detected in front of you comes in and goes out of the
ACC with LSF detecting range. Change the
ACC
Vehicle Ahead Detected Beep
setting.
2
P. 387
Beep
ACC with LSF Range: 120 m
A vehicle icon appears on the
driver information interface
17 CIVIC 5D (KE KG)-32TGG6000.book 548 ページ ２０１７年１０月２０日 金曜日 午前１１時４９分