268
Co
ntrols
Heating System
*
Using Automatic Heating
The automatic heating system maintains the interior temperature you select. The
system also selects the proper mix of heated or outside air that raises or lowers the
interior temperature to your preference.
Use the system when the engine is running.
1.
Press the
AUTO
button.
2.
Adjust the interior temperature using the temperature control dial.
3.
Press the
(ON/OFF) button to cancel.
1
If any buttons are pressed while using the heating
system in auto, the function of the button that was
pressed will take priority.
The
AUTO
indicator will go off, but functions
unrelated to the button that was pressed will be
controlled automatically.
During idle-stops, heating system is suspended, and
only the blower remains active.
If you do not want heating system suspended, press
to cancel idle-stop.
To prevent cold air from blowing in from outside, the
fan may not start immediately when the
AUTO
button is pressed.
When you set the temperature to the lower or upper
limit,
Lo
or
Hi
is displayed.
Pressing the
button switches the heating
system between on and off. When turned on, the
system returns to your last selection.
While ECON mode is active, the heating system may
have reduced heating performance.
Models with ECON button
Temperature
Control Dial
*1
(ON/OFF)
Button
*1
Fan Control
Dial
*1
AUTO
Button
*1
*1: Left-hand drive models shown. For the right-hand drive models, these buttons
are located at the symmetrically opposite to the left-hand drive model.
(Recirculation) Button
(Fresh Air) Button
Dashboard
vents
Dashboard
and floor
vents
Floor vents
Floor and
demister
vents
* Not available on all models
17 CIVIC 5D (KE KG)-32TGG6000.book 268 ページ ２０１７年１０月２０日 金曜日 午前１１時４９分