uu
If a Tyre Goes Flat
u
Temporarily Repairing a Flat Tyre
748
Han
d
lin
g the U
n
expected
•
Greater than 130 kPa (1.3 bar, 19 psi), but
less than: 250 kPa (2.5 bar, 36 psi):
Turn the air compressor on to inflate the
tyre until the tyre pressure reaches: 250 kPa
(2.5 bar, 36 psi).
•
Greater than 130 kPa (1.3 bar, 19 psi), but
less than: 220 kPa (2.2 bar,32 psi):
Turn the air compressor on to inflate the
tyre until the tyre pressure reaches: 220 kPa
(2.2 bar, 32 psi).
•
Greater than 130 kPa (1.3 bar, 19 psi), but
less than: front: 240 kPa (2.4 bar, 35 psi)/
rear: 230 kPa (2.3 bar, 33 psi):
Turn the air compressor on to inflate the
tyre until the tyre pressure reaches: front:
240 kPa (2.4 bar, 35 psi)/rear: 230 kPa (2.3
bar, 33 psi).
2
Inflating an Under-inflated Tyre
Then drive carefully for 10 more minutes or
until you reach the nearest service station.
Do not exceed 80 km/h (50 mph).
u
You should repeat this procedure as long
as the air pressure is within this range.
6.
Repackage and properly stow the kit.
Air Compressor Switch
Models with 215/55R16 93V tyres
Models with 235/45R17 94W tyres
Models with 245/30ZR20 90Y tyres
1
Distributing the Sealant in the Tyre
Refer to the driver’s doorjamb label for the specified
pressure.
3
WARNING
Running the engine with the vehicle in an
enclosed or even partly enclosed area can
cause a rapid build-up of toxic carbon
monoxide.
Breathing this colourless, odourless gas can
cause unconsciousness and even death.
Only run the engine to power the air
compressor with the vehicle outdoors.
17 CIVIC 5D (KE KG)-32TGG6000.book 748 ページ ２０１７年１０月２０日 金曜日 午前１１時４９分