714
uu
Battery
u
Replacing the Battery
Main
tenan
ce
Replacing the Battery
When you remove and replace the battery, always follow the maintenance safety
and the warnings for when checking the battery to prevent potential hazards.
2
2
1.
Turn the ignition switch to LOCK
(
0
*1
.
Open the bonnet.
2.
Loosen the nut on the negative battery
cable, then disconnect the cable from the
negative (–) terminal.
3.
Open the positive battery terminal cover.
Loosen the nut on the positive battery
cable, then disconnect the cable from the
positive (+) terminal.
4.
Loosen the nut on each side of the battery
bracket with a wrench.
5.
Pull the bottom end of each battery stay out
of the hole on the battery base, and remove
the combination of the battery bracket and
the stays.
*1: Models with the keyless access system have an
ENGINE START/STOP
button instead of an
ignition switch.
European models
1
The indicators for the Adaptive Cruise Control
(ACC)
*
, Adaptive Cruise Control (ACC) with Low
Speed Follow (LSF)
*
, road departure mitigation
*
,
Vehicle Stability Assist (VSA) System, Vehicle Stability
Assist (VSA) OFF, low tyre pressure/deflation warning
system
*
, deflation warning system
*
and Collision
Mitigation Braking System (CMBS)
*
may come on
when you turn the ignition switch to ON
(
w
*1
after
reconnecting a battery.
Drive a short distance at more than 20 km/h (12
mph). Each indicator should go off. If none of them
do, have your vehicle checked by a dealer.
1
NOTICE
An improperly disposed of battery can be harmful to
the environment and human health. Always confirm
local regulations for battery disposal.
This symbol on the battery means that this product
must not be treated as household waste.
Cover
Nuts
Stay
Stay
Nuts
* Not available on all models
17 CIVIC 5D (KE KG)-32TGG6000.book 714 ページ ２０１７年１０月２０日 金曜日 午前１１時４９分