Honda Civic 2016, Manual, Page: 546 / 621

545
uu Checking and Maintaining Tyres u Wear Indicators
Main
tenan
ce
Wear Indicators
The groove where the wear indicator is
located is 1.6 mm shallower than elsewhere
on the tyre. If the tread has worn so that the
indicator is exposed, replace the tyre.
Worn
out tyres have poor traction on wet
roads.
Tyre Service Life
The life of your tyres is dependent on many factors, including driving habits, road
conditions, vehicle loading, inflation pressure, maintenance history, speed, and
environmental conditions (even when the tyres are not in use).
In addition to regular inspections and inflation pressure maintenance, it is
recommended that you have annual inspections performed once the tyres reach five
years old. All tyres, including the spare, should be removed from service after 10
years from the date of manufacture, regardless of their condition or state of wear.
1 Checking Tyres
High speed driving
We recommend that you do not drive faster than the
posted speed limits and conditions allow. If you drive
at sustained high speeds (over 160 km/h), adjust the
cold tyre pressures as shown below to avoid excessive
heat build up and sudden tyre failure.
Tyre Size 215/50R17 91V
Pressure Front: 240 kPa (2.4 kgf/cm 2 , 35 psi)
Rear: 230 kPa (2.3 kgf/cm 2 , 33 psi)
Example of a Wear
Indicator mark
17 CIVIC 4D HATC HMSB (IN KN PH KQ KS KU KZ VT MA PA)-42TBA6100.book 545 ページ ２０１８年４月９日 月曜日 午後４時３５分