Honda Civic 2016, Manual, Page: 570 / 621

Continued
569
uu If a Tyre Goes Flat u Changing a Flat Tyre
Han
d
lin
g the U
n
expected
1. Remove the wheel nuts and flat tyre.
2. Wipe the mounting surfaces of the wheel
with a clean cloth.
3. Mount the spare tyre.
4. Screw the wheel nuts until they touch the
lips around the mounting holes, then stop
rotating.
5. Lower the vehicle and remove the jack.
Tighten the wheel nuts in the order
indicated in the image. Go around,
tightening the nuts, two to three times in
this order.
Wheel nut torque:
108 N∙m (11 kgf∙m, 80 lbf∙ft)
■
Replacing the Flat Tyre
1 Replacing the Flat Tyre
Do not over tighten the wheel nuts by applying extra
torque using your foot or a pipe.
Make sure the wire support ring is hooked into the
clips around the edge of the wheel cover.
Align the valve mark on the wheel cover to the tyre
valve on the wheel, then install the wheel cover.
Models with wheel cover
Clips Clips
Valve Mark
17 CIVIC 4D HATC HMSB (IN KN PH KQ KS KU KZ VT MA PA)-42TBA6100.book 569 ページ ２０１８年４月９日 月曜日 午後４時３５分