Adjusting the Rear Suspension
#
Spring Preload
You can adjust the spring preload by the
adjuster to suit the load or the road surface.
Turn the adjuster using the pin spanner and
extension bar provided in the tool kit.
The preload adjuster has 10 positions.
Position 1 is for a decrease spring preload
(soft), or turn the position 3 to 10 increase
spring preload (hard). The standard position
is 2.
NOTICE
Do not turn the adjuster beyond its limits.
Attempting to adjust directly from 1 to 10 or 10 to
1 may damage the shock absorber.
NOTICE
The rear shock absorber damper unit contains
high pressure nitrogen gas. Do not attempt to
disassemble, service, or improperly dispose of
the damper. See your dealer.
20201016101019_32MKZ6000_eng_BOOK Page 145 Friday, October 16 2020 10:18:27 JST
Other Adjustments
u
Adjusting the Rear Suspension
Maintenance
142
Extension bar
1 2 3 4 5 6 7
8
9
Pin spanner
Adjuster
10
