Honda CBR500R 2020, Manual, Page: 80 / 159

Removing & Installing Body Components
Battery
#
Removal
Make sure the ignition switch is in the OFF
position.
1. Remove the front seat.
2
P. 80
2.
Unhook the rubber strap from rear side.
3.
Disconnect the negative
-
terminal from the
battery.
4.
Disconnect the positive
+
terminal from the
battery.
5. Remove the battery taking care not to drop
the terminal nuts.
#
Installation
Install the parts in the reverse order of removal.
Always connect the positive
+
terminal first. Make
sure that bolts and nuts are tight.
Make sure the clock information is correct
after the battery is reconnected.
2
P. 31
For proper handling of the battery, see
“Maintenance Fundamentals.”
2
P. 67
“Battery Goes Dead.”
2
P. 122
Maintenance
78
Rubber strap
Positive terminal
Negative
terminal
Battery