Honda CBR125R, Owner'S Manual

Page: 244 / 430

CLUTCH/GEARSHIFT LINKAGE
10-20
PRIMARY DRIVE GEAR
REMOVAL
If you replace the primary drive gear, be careful to
select the identification color of the primary drive
gear (page 10-22).
Remove the following:
– Clutch assembly (page 10-9)
– Oil pump (page 4-4)
Temporarily install the washer, clutch outer guide
and clutch outer.
Insert the gear holder between the primary drive
and driven gears.
Loosen the primary drive gear lock nut using the
special tools.
Remove the clutch outer, clutch outer guide, lock
nut and washers.
Remove the primary drive gear.
Be careful not to
damage the key
groove and
crankshaft.
Remove the woodruff key and washer.
TOOLS:
Lock nut wrench, 20 x 24 mm
07716-0020100
Gear holder 07724-0010200
Extension bar/handle 07716-0020500
CLUTCH OUTER/GUIDE/WASHER
GEAR HOLDER
LOCK NUT/
WASHER
LOCK NUT
WRENCH
PRIMARY DRIVE GEAR
WASHER WOODRUFF KEY