Honda CB500F 2019 Manual Download

Page: 97 / 161

Drive Chain

Inspecting the Drive Chain

Slack

Check the drive chain slack at several points

along the chain. If the slack is not constant at

all points, some links may be kinked and

binding.

Have the chain inspected by your dealer.

Shift the transmission to Neutral. Stop the

engine.

Place your motorcycle on its side stand on

a firm, level surface.

Check the slack in the lower half of the

drive chain midway between the

sprockets.

Drive chain slack:

1 - 1 3/8 in (25 - 35 mm)

Do not ride your motorcycle if the

slack exceeds 1 15/16 in (50 mm).

Roll the motorcycle forward and check

that the chain moves smoothly.

Inspect the sprockets.

P. 71

Clean and lubricate the drive chain.

P. 72

20181219111032_31MKPB000_enu_BOOK Page 98 Wednesday, December 19 2018 11:25:27 JST

Maintenance

Summary of Contents for CB500F 2019


































































































































































Search results

Summary of Contents for CB500F 2019

Reviews:

Related manuals for CB500F 2019

Brands by name

Popular brands

Honda CB500F 2019, Manual

Search results

Summary of Contents for CB500F 2019

Reviews:

Related manuals for CB500F 2019

Brands by name

Popular brands