Setting Mode B
If the buttons are not pressed for about 30
seconds, the control is automatically switched
from the setting mode to the ordinary
display.
If the buttons are not pressed for about 30
seconds, items in the process of being set will
be discarded and only items where settings
have been finalised will be applied. Only if
the ignition switch is turned to the (Off)
position, items in the process of being set
and those that are finalised will be applied.
1 Setting of REV indicator:
You can change the setting of the REV
indicator.
REV indicator is blinking while setting.
20180116165849_32K0AC000_eng_BOOK Page 34 Tuesday, January 16 2018 17:05:27 JST
Operation Guide
31
Continued
SET
button
SEL
button
Tachometer
REV indicator
Numerical
tachometer display