83
SERVICING YOUR OUTBOARD MOTOR
4. With the outboard motor in a
vertical position, fill to the upper
limit mark on the oil level dipstick
(p.80) with the recommended oil.
Engine oil refill capacity:
Without oil filter change:
4.4 US qt (4.2 L)
With oil filter change:
4.6 US qt (4.4 L)
5. Install the oil filler cap and tighten
6. Install and lock the engine cover.
Oil Filter Change
1. Drain the engine oil, and reinstall
the drain bolt (see Engine Oil
Change on p.82).
2. Tilt the outboard motor, and place a
suitable container below the oil
drain guide to catch the used oil.
3. Use a suitable tool to remove the
oil filter, and thoroughly drain the
filter into the used oil container.
OIL FILTER
OIL DRAIN GUIDE
RUBBER SEAL
64 mm FILTER WRENCH
31ZY96300.book 83 ページ ２０１３年１０月２１日 月曜日 午前９時２５分
Summary of Contents for BF100D
Page 1: ...Click to Save As...
Page 152: ...150 MEMO 31ZY96300 book 150...
Page 153: ...151 MEMO 31ZY96300 book 151...
Page 154: ...152 MEMO 31ZY96300 book 152...
