Honda BF100D, Owner'S Manual

Page: 109 / 155

107
STORAGE
Engine Oil
1. Change the engine oil and the oil
filter (p.82-84).
2. Remove the spark plugs (p.85), and
remove the emergency stop switch
clip from the emergency stop
switch.
3. Pour 1-2 teaspoons (5-10 cm
3
) of
clean engine oil into each cylinder.
4. Rotate the engine a few revolutions
to distribute the oil in the cylinders.
5. Reinstall the spark plugs (p.87).
HOISTING THE OUTBOARD
MOTOR
1. Unlock and remove the engine
cover (p.79).
2. Attach the hoist hooks to the
engine hangers.
3. Disconnect the outboard motor
from the boat, hoist the outboard
motor, and move it to the storage
area.
4. After the outboard motor is placed
in storage and disconnected from
the hoist, install the engine cover.
STORAGE PRECAUTIONS
Select a well-ventilated storage area.
If possible, avoid storage areas with
high humidity.
If storing a container of gasoline,
store it away from any appliance that
operates with a flame, such as a
furnace, water heater, or clothes
dryer. Also avoid any area with a
spark producing electric motor, or
where power tools are operated.
HOIST
HOOKS
ENGINE
HANGERS
31ZY96300.book 107 ページ ２０１３年１０月２１日 月曜日 午前９時２５分