Honda BeAT 2022, Owner'S Manual, Page: 91 / 123

When the Idling Stop System Does Not Operate Properly
Idling Stop Indicator Does Not
Come On
ACJ110CBT
When the Idling Stop indicator does not
come on, perform the followings.
If the Idling Stop switch is at IDLING:
Press the Idling Stop switch to IDLING STOP.
If you started the engine with the kickstarter:
If you started the engine with the kickstarter,
the Idling Stop system may not operate.
Restart the engine with the start button,
referring to the starting procedure (
2
P. 32)
for standard engine staring.
If the engine is cold:
Warm up the engine.
The Idling Stop system does not operate
when the engine is cold.
If you did not ride the vehicle after engine
starts:
Ride the vehicle at speeds of over 10 km/h
(6 mph). The Idling Stop system does not
operate until you ride once.
If PGM-FI malfunction indicator lamp (MIL)
lights:
When the PGM-FI malfunction indicator lamp
(MIL) lights, the Idling Stop system does not
operate for protection of the engine. See
your dealer.
If the battery voltage is low:
Ride the vehicle awhile, then stop the engine
and then restart the engine with the start
button referring to the starting procedure
(
2
P. 32) for standard engine starting. The
Idling Stop system may not operate if the
battery voltage is low.
If this occurs frequently, contact your dealer.
20191121121003_32K0JA010_eng_BOOK Page 90 Thursday, November 21 2019 12:13:24 JST
Troubleshooting
87