Honda AQUATRAX R-12X, Owner'S Manual

Page: 53 / 247

Instruments & Controls 46
The jet pump water intake (1) draws water
into the propulsion system. A grate (2) helps
to screen out debris.
UNDER HULL
(1) jet pump water intake
(2) grate
The cooling water bypass outlet (1) is used to
check that water is circulating properly in the
engine cooling system while the engine is
running. If you don
’
t see water flowing out of
the outlet, stop the engine.
Check for possible causes of the problem
(page 196).
REAR
(1) cooling water bypass outlet
Controls & Features
Jet Pump Water Intake Cooling Water Bypass Outlet
(1)
(2)
(1)