Honda AFRICA TWIN Owner'S Manual Download Page 223

Page: 223 / 377

To Change the Set Speed

To Fine Tune the Set Speed

Select the riding information.

(

P.40

)

Display the cruise control set speed on the

multi-information display.

To increase the set speed: tap the

cruise control lever to

side.

To decrease the set speed: tap the

cruise control lever to

side.

The set speed is displayed in the multi-

information display.

Each quick tap (brief push and release) on

either side will change your speed by 1 km/h

or 1 mph (depending on mileage meter set

unit).

Any speed other than the possible setting

range will not be indicated (stops at the

upper or lower limit speed).

The system will accelerate your vehicle

automatically. When you reach the

desired speed, release the

cruise control lever.

To Change the Set Speed Continuously

●

To increase the set speed: push and hold

the

cruise control lever

side.

If the

cruise control

lever is pushed and held to

side

continuously, the set speed indicated in

the multi-information display stops at the

upper limit of the possible setting range.

20190704203539_32MKS6000_eng_BOOK Page 222 Thursday, July 04 2019 20:57:26 JST

Operation Guide

217

Continued

Cruise control set speed

Summary of Contents for AFRICA TWIN


























































































































































































































































































































































































Search results

Summary of Contents for AFRICA TWIN

Reviews:

Related manuals for AFRICA TWIN

Brands by name

Popular brands

Honda AFRICA TWIN, Owner'S Manual

Search results

Summary of Contents for AFRICA TWIN

Reviews:

Related manuals for AFRICA TWIN

Brands by name

Popular brands