25
continued
O
p
er
at
io
n Gu
id
e
Gear position indicator
The gear position is shown in the gear position indicator.
u
“ ” appears when the transmission is not shifted properly.
The gear position is shown in the gear position indicator when the D, S mode or MT MODE
are selected.
u
“ ” flashes when the engine stop switch position is changed from
(Run) to
(Off) position
with the ignition switch on.
u
“ ” flashes when the ignition switch is turned on with the engine stop switch
(Off) position.
The indicator may flash if:
u
The front wheel leaves the ground.
u
You turn the wheel while the motorcycle is upright on the stand.
This is normal. To operate the system again, turn the ignition switch off, then on again.
If the “ ” indicator is blinking in the gear position window while riding:
CRF1000A
CRF1000D
16 CRF1000 A D (TH)-32MJP8000.book 25 ページ ２０１６年８月１０日 水曜日 午後３時３１分
