75
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Message
Malfunction
Indicator Lamp
●
Comes on when you set the power
mode to ON, and goes off either
when the power system is on or
after several seconds if the power
system did not turn on. If
“readiness codes” have not been
set, it blinks five times before it
goes off.
●
Comes on if there is a problem with
the emissions control system.
●
Blinks when a misfire in the
engine’s cylinders is detected.
●
Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2
●
Comes on while driving
- Have your
vehicle checked by an authorized Acura
NSX dealer.
●
Blinks while driving
- Stop in a safe place
where there are no flammable objects.
Stop the power system for 10 minutes or
more, and wait for it to cool down. Then,
take the vehicle to an authorized Acura
NSX dealer.
2
If the Malfunction Indicator Lamp
Comes On or Blinks
●
Comes on if there is a problem with
the gear shift mechanism.
●
Comes on and gear position indicator
blinks at the same time
- Have your
vehicle checked by an authorized Acura
NSX dealer.
12-Volt Battery
Charging System
Indicator
●
Comes on when you set the power
mode to ON, and goes off when
the power system is on.
●
Comes on when the 12-volt battery
is not charging.
●
Comes on while driving
- Turn off the
climate control system and rear defogger
in order to reduce electricity consumption.
2
If the 12-Volt Battery Charging
System Indicator Comes On
P. 438
17 NSX-31T6N6000.book 75 ページ 2016年4月22日 金曜日 午後3時44分