Page
13
of
13
20.
Check the Head-Up Warning (HUW) Indicator (If Equipped)
When your first turn the ignition to ON, the HUW indicator should flash, then go off.
21.
Check the Moonroof One-Touch Feature (EX-L and Touring)
Make sure the moonroof one-touch feature works right:
•
When you firmly pull the moonroof switch backward and release it, the moonroof should fully open.
•
When you firmly push the switch forward and release it, the moonroof should fully close.
•
When you push up on the switch and release it, the moonroof should tilt.
If the moonroof does not work right, do this procedure to calibrate it:
NOTE:
•
Calibration is not needed after disconnecting the battery.
•
Calibrate the moonroof one-touch feature after replacing any moonroof components or after installing the accessory
moonroof visor.
1. Close the driver’s door and leave it closed until the procedure is done.
2. Turn the ignition to OFF.
3. Press and hold the tilt switch, then turn the ignition to ON.
4. Release the tilt switch, then turn the ignition to OFF.
5. Repeat steps 3 and 4 four more times.
6. Check if the auto open and auto close functions still work. If they do, the auto functions have
not
been cleared.
Go back to step 1. If the auto functions have been cleared, go to step 7.
7. Press and hold the moonroof open switch for at least
3 more seconds
after the moonroof is fully open.
8. Press and hold the moonroof close switch for at least
3 more seconds
after the moonroof is fully closed.
9. Make sure the moonroof control unit is reset by using the moonroof auto open and auto close function.
END