Honda Accord 4D 2003-2006, Owner'S Manual, Page: 89 / 525

This light has two functions: This indicator comes on for a few
seconds when you turn the ignition
switch to ON (II). It will then go off
if you have inserted a properly-coded
ignition key. If it is not a properly-
coded key, the indicator will blink
and the engine will not start (see
page
).
This indicator also blinks several
times when you turn the ignition
switch from ON (II) to ACCESSORY
(I) or LOCK (0).
If the indicator remains lit after
you have fully released the
parking brake while the engine is
running, or if it comes on while
driving, it can indicate a problem
in the brake system. For complete
information, see page
.
This indicator normally comes on for
a few seconds when you turn the
ignition switch to ON (II). If this
indicator comes on at any other time,
there is a problem in the ABS. If this
happens, take the car to your dealer
to have it checked. With the
indicator on, your car still has normal
braking ability but no anti-lock. For
complete information, see page
.
This indicator comes on when you
turn the ignition switch to ON (II).
It is a reminder to check the
parking brake. If you drive at
certain speeds without fully
releasing the parking brake, the
beeper sounds continuously.
Driving with the parking brake not
fully released can damage the
brakes and tyres. 1.
2.
483
108
330
Parking Brake and
Brake System Indicator Immobilizer System
Indicator Anti-lock Brake System
(ABS) Indicator
Indicator Lights
Instruments and Controls
86
03/09/03 14:17:10 32SEA610_089