Honda Accord 4D 2003-2006, Owner'S Manual, Page: 44 / 525

CONTINUED
Place the child restraint system in
the desired back seating position.
Press both of the release buttons
at the bottom of the handle, then
pull up the handle to the upright
position. Make sure the handle is
latched and the child restraint is
positioned well back in the seat-
back.
When properly installed, a rearward
facing child restraint system may
prevent the driver or a front-seat
passenger from moving the seat as
far back as recommended (see page
). Or it may prevent them from
locking the seat-back in the desired
upright position (see page
).
In either case, we recommend that
you place the child restraint system
directly behind the front passenger
seat, move the front seat as far
forward as needed, and leave it
unoccupied. Or you may wish to get
a smaller child restraint system that
allows you to safely carry a front
passenger.
To properly route a lap/shoulder belt
through a child restraint system,
follow the restraint system maker’s
instructions.
For EU countries, refer to page
for installing a child restraint
system.
The lap/shoulder belts in the back
seating positions have a locking
mechanism that must be activated to
secure a child restraint system.
The following pages provide
instructions and tips on how to
secure a rearward facing child
restraint system with this type of
seat belt. (The procedures in these
pages are described based on a child
restraint system available in EU
countries.)
1.
37
16
15
Protecting Children
Driver and Passenger Saf ety
Rearward Facing Child Restraint
System Installation
41
03/09/03 14:10:30 32SEA610_044