Honda Accord 4D 2003-2006, Owner'S Manual, Page: 382 / 525

CONTINUED
If possible, remove the drain bolt
and washer on the back of the
engine block and drain the coolant
into an appropriate container.
When the coolant stops draining,
tighten the drain plug at the
bottom of the radiator securely.
Tighten it to:
Put a new washer on the drain bolt,
and then reinstall the drain bolt on
the back of the engine block
securely. Tighten it to:
Pour the coolant over the MAX
line as shown in the illustration to
fill the engine block with the
coolant.
This coolant is a mixture of 50
percent antifreeze and 50 parcent
water. Pre-mixing is not required.
Pour genuine Honda All Season
Antifreeze/Coolant Type 2 into
the expansion tank.
Make sure that the bleeding bolt is
loosened on the cylinder head and
the bleeding plug on the expansion
tank is removed.
7.
8.
9.
10.
Cooling System (Diesel models)
Maintenance
379
DRAIN BOLT
ENGINE
BLOCK
Over
MAX
Line
RADIATOR
EXPANSION TANK
2.0 N·m (0.2 kgf·m , 1.4 lbf·ft)
39 N·m (4.0 kgf·m , 29 lbf·ft)
03/09/03 15:01:44 32SEA610_382