Honda Accord 4D 2003-2006 Owner'S Manual Download Page 370

Page: 370 / 525

Open the bonnet and remove the
engine oil fill cap.

Remove the oil drain bolt and
washer from the bottom of the en-
gine. Drain the oil into an appropri-
ate container.

Remove the bolt with a wrench,
then remove the maintenance lid
under the vehicle.

Run the engine until it reaches
normal operating temperature,
then shut it off.

CONTINUED

Engine Oil (Diesel models)

Maintenance

367

Repeated, prolonged
exposure to used motor oil
may cause skin cancer.

Wash your hands thoroughly
with strong soap as soon as
possible after handling used
oil.

The oil, engine components
and the exhaust system are
hot and can burn you.

Use caution and wear
protective clothing while
working in the engine
compartment.

WASHER

LID

BOLT

OIL DRAIN BOLT

03/09/03 14:59:44 32SEA610_370

Summary of Contents for Accord 4D 2003-2006














































































































































































































































































































































































































































































































































Search results

Summary of Contents for Accord 4D 2003-2006

Reviews:

Honda Accord 4D 2003-2006, Owner'S Manual, Page: 370 / 525

Search results

Summary of Contents for Accord 4D 2003-2006

Reviews: