Honda Accord 4D 2003-2006 Owner'S Manual Download Page 23

Page: 23 / 525

If a seat belt does not seem to work
as it should, it may not protect the
occupant in a crash.

Anyone using a seat belt that is

not working properly can be
seriously injured or killed. Have your
Honda dealer check the belt as soon
as possible.

See page

for additional

information about your seat belt
system and how to take care of your
belts.

Adjust the steering wheel, if needed,
so that the wheel points toward your
chest, not toward your face.

Pointing the steering wheel toward
your chest provides optimal
protection from the airbag.

See page

for how to adjust the

steering wheel.

106

Protecting Adults

Driver and Passenger Saf ety

No one should

sit in a seat with an inoperative seat
belt.

Adjust the Steering Wheel

03/09/03 14:07:23 32SEA610_023

Summary of Contents for Accord 4D 2003-2006














































































































































































































































































































































































































































































































































Search results

Summary of Contents for Accord 4D 2003-2006

Reviews:

Honda Accord 4D 2003-2006, Owner'S Manual, Page: 23 / 525

Search results

Summary of Contents for Accord 4D 2003-2006

Reviews: