Honda ACB125CBF 2019, Owner'S Manual

Page: 37 / 129

33
Ope
ra
tion Guid
e
u
You need to operate this process from the
(Off) position to the (On) position
within 5 seconds.
! c
Turn and keep the ignition switch to the (On)
position. Press the SET button to select among
3 sensitivity levels of anti-theft alarm system.
3 times of alarm sound: high sensitivity
2 times of alarm sound: middle sensitivity
1 time of alarm sound: low sensitivity
The alarm indicator lights while setting.
! d
Turn the ignition switch to the (Off)
position to finish setting the sensitivity level.
(Off) (On)
SET button
LED
To complete your setting, you need to go
through step 3 within 60 seconds.
Make sure that LED on the remote
transmitter is green before setting the
sensitivity level.
Because if it is red, you cannot set the
sensitivity level.
#
If the Anti-theft Alarm System Does
Not Operate Properly
If any of the following situations arise, battery
(
2
P. 61
) in the scooter is discharged
or there is a system problem. Remove the
battery and see your dealer.
The alarm does not sounds.
The alarm sounds but fades out.
The alarm system does not stop.
19 ACB125CBT CBF (IN PH) 32K60A100.book Page 33 Monday, April 2, 2018 1:48 PM