Home
/
Honda
/
2011 Pilot
/
Owner'S Manual

Honda 2011 Pilot, Owner'S Manual, Page: 163 / 574

Share

Page: 163 / 574

Honda 2011 Pilot Owner'S Manual Download Page 163

To adjust the second row seats
forward and backward, pull up on the
bar under the front edge of the seat
cushion. Move the seat to the
desired position and release the bar.
Try to move the seat to make sure it
is locked in position.

This reduces the distance between
the restraint and the occupant’s head.
It also helps protect the occupants
against the likelihood of whiplash
and injuries to the neck and upper
spine.

For a head restraint system to work
properly:

Do not hang any items on the head
restraints, or from the restraint
legs.

Only use genuine Honda
replacement head restraints.

Install each restraint in its proper
location.

Do not place any object between
an occupant and the seat-back.

If the restraints do not return to their
normal position, or in the event of a
severe collision, have the vehicle
inspected by a Honda dealer.

After a collision, the activated
restraint should return to its normal
position.

CONTINUED

Seats

Adjusting the Second Row Seats

Inst

ru

m

e

nt
s

a

nd

Cont

ro

ls

159

10/01/26 18:50:27 31SZA620_164

2011 Pilot

«
...
161
162
163
164
165
...
»

Summary of Contents for 2011 Pilot































































































































































































































































































































































































































































































































































































Reviews:

No comments