Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the headlights to test the
new bulb.
Reinstall the air intake duct
securely.
(Driver’s side)
Put the inner fender cover in place.
Install and lock each holding clip
by pushing on the center.
To change the passenger’s side
bulb, start the engine, turn the
steering wheel all the way to the
left, and turn off the engine. To
change the driver’s side bulb, turn
the steering wheel to the right.
Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the inner fender cover away
from the fender and bumper.
1
.
3
.
2
.
4
.
9
.
7
.
8
.
11
.
10
.
CONTINUED
On EX-V6 model with manual
transmission
Replacing a Front Side Marker/
Parking/Turn Signal Light Bulb
Lights
Ma
int
e
na
nce
249
HOLDING CLIPS
Main Menu
Table of Contents
s
t
Main Menu
s
t
Table of Contents
Summary of Contents for 2007 Accord Coupe
Page 185: ......
