You can manually select various
functions of the climate control
system when it is in full automatic
mode. All other features remain
automatically controlled.
Making any manual selection causes
the word AUTO in the display to go
out.
When you turn the passenger’s side
temperature control dial, the
indicator in the DUAL button comes
on and the driver’s side and
passenger’s side temperature can be
controlled independently (see page
).
The system automatically selects the
proper mix of conditioned and/or
heated air that will, as quickly as
possible, raise or lower the interior
temperature to your preference.
When you set the temperature to its
lower limit (
) or its upper limit
(
), the system runs at full
cooling or heating only. It does not
regulate the interior temperature.
In cold weather, the fan will not
come on automatically until the
heater starts to develop warm air.
Select the fan speed by pressing the
fan control buttons (
or
).
The fan speed is shown in vertical
bars on the display.
Turn these dials to the desired
temperature. The temperature
setting is shown in the display.
The driver and passenger can select
independent temperature settings.
Making any manual selection causes
the word FULL in the display to go
out.
On U.S. models
On Canadian models
Semi-automatic Operation
Fan Control Buttons
Temperature Control Dials
Climate Control System
114
Main Menu
Table of Contents
s
t
Main Menu
s
t
Table of Contents
Summary of Contents for 2007 Accord Coupe
Page 185: ......
