Honda 2006 Odyssey Online Reference Owner'S Manual Download Page 345

Page: 345 / 420

Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.

Remove the bulb by turning it one-
quarter turn counterclockwise.

Open the hood. Remove the
socket from the headlight
assembly by turning it one-quarter
turn counterclockwise.

Pull the burned out bulb straight
out of its socket.
Push the new bulb straight into
the socket until it bottoms.

Push the electrical connector back
onto the bulb. Make sure it is on
all the way.

Turn on the headlights to test the
new bulb.

If you replaced the high beam
headlight bulb on the passenger’s
side, reinstall the power steering
fluid reservoir.

Insert the new bulb into the hole,
and turn it one-quarter turn clock-
wise to lock it in place.

Lights

Replacing a Front Turn Signal
Bulb

344

TAB

Summary of Contents for 2006 Odyssey





































































































































































































































































































































































































































Search results

Summary of Contents for 2006 Odyssey

Reviews:

Honda 2006 Odyssey, Online Reference Owner'S Manual, Page: 345 / 420

Search results

Summary of Contents for 2006 Odyssey

Reviews: