Honda 2001 Passport Owner'S Manual Download Page 78

Page: 78 / 317

Rear Window and Mirror

Defoggers

With the ignition "ON," push the

defogger switch to use the rear

window and mirror defoggers.

The indicator light in the switch

lights to show the defogger is on.

The defogger will shut itself off

after 10 minutes. If the rear

window or mirrors are not

completely clear, press the switch

again to turn on the defogger for

another 10 minutes. It also shuts

off when you turn off the ignition.

You have to turn it on again when

you restart the vehicle.

Make sure the rear window is

clear and you have good visibility

before starting to drive.

The defogger wires on the inside

of the rear window can be easily

damaged. When cleaning the

glass, always wipe side to side.

Do not use any abrasive cleaners.

Rear Window Wiper/Washer

To operate the rear window wiper,

press the wiper button. The wiper

runs in intermittent mode until

you press the button again.

To wash the rear window, push

and hold the rear window washer

button. The washer and wiper will

run until you release the button.

The rear window wiper cannot be

operated when the rear window is

not latched.

Instruments and Controls

REAR WASHER

BUTTON

REAR WIPER

BUTTON

Summary of Contents for 2001 Passport






























































































































































































































































































































Search results

Summary of Contents for 2001 Passport

Reviews:

Honda 2001 Passport, Owner'S Manual, Page: 78 / 317

Search results

Summary of Contents for 2001 Passport

Reviews: