Honda 2001 Passport Owner'S Manual Download Page 220

Page: 220 / 317

Automatic Transmission Fluid

Proper Fluid

Have the fluid level in the

automatic transmission checked

during the regularly scheduled

maintenance at your Honda

dealer.

If you suspect an automatic

transmission fluid leak, take the

vehicle to your Honda dealer for

inspection and repair.

Transmission damage could result

if you let the fluid level get too

low.

Drain Intervals

The automatic transmission drain

interval is not time or mileage

dependent. It will vary according

to your driving habits and vehicle

usage.

Your dealer will check the

transmission fluid's condition and

life expectancy during regularly

scheduled maintenance, and

inform you at what mileage it

should be changed.

Front (4WD)

and Rear Axles

See the Maintenance Schedule

List to determine how often the

lubricant should be changed. Add

lubricant, if needed, by filling to

the level of the filler plug hole.

Use GL-5 gear lubricant of the

proper viscosity as shown in the

chart.

If your vehicle is equipped with

the optional limited slip

differential (on the rear axle), use

GL-5 Limited Slip Differential

Gear Lubricant together with

Limited Slip Differential Gear

Lubricant Additive (Part No.

8-01052-358-0) or equivalent.

Use the correct viscosity for the

existing ambient temperatures.

Care and Maintenance

Summary of Contents for 2001 Passport






























































































































































































































































































































Search results

Summary of Contents for 2001 Passport

Reviews:

Honda 2001 Passport, Owner'S Manual, Page: 220 / 317

Search results

Summary of Contents for 2001 Passport

Reviews: