Honda 2001 Passport Owner'S Manual Download Page 202

Page: 202 / 317

Fuel Recommendation

Use only unleaded gasoline. For

additional information see "Fuel

Requirements" in this section.

Fuel Tank Capacity

19.5 U.S. gallons (75 liters)

Engine OH Recommendation

Use only SJ quality oil.

The chart shown under "Engine

Oil and Filter" in this section will

serve as a guide for choosing the

proper viscosity oil.

Windshield Washer

Check the reservoir fluid level

regularly. Use a commercially

available windshield washer fluid.

The windshield washer reservoir

is located on the front right side of

the engine compartment.

Tire Inflation Pressures

Check at least monthly, including

the spare. Keep inflated to the

pressure shown on the tire placard

on the driver's doorjamb.

LABEL

Battery

Your new vehicle has a low

maintenance battery.

CHARGE TEST INDICATOR

BLUE

COLORLESS

You will never have to add water.

The hydrometer (test indicator) in

the top of the battery provides

information for testing purposes

only.

WARNING:

Battery posts,

terminals and related accessories

contain lead and lead compounds.

Wash hands after handling.

Care and Maintenance

UPPER LEVEL

LOWER LEVEL

CHARGING

NECESSARY

Summary of Contents for 2001 Passport






























































































































































































































































































































Search results

Summary of Contents for 2001 Passport

Reviews:

Honda 2001 Passport, Owner'S Manual, Page: 202 / 317

Search results

Summary of Contents for 2001 Passport

Reviews: