Honda 2001 Passport Owner'S Manual Download Page 152

Page: 152 / 317

Accelerating (While Cruise

Control System Is in Use)

Depress the accelerator pedal for

acceleration.
When you release the accelerator

pedal, the vehicle's speed will

gradually return to the preset speed.

Resetting to Higher Cruising Speed

You can accelerate by turning and

holding the knob at the

"RESUME/ACCEL" position for

more than one second.
The cruise control system will be

reset to the speed you are

travelling when you release the

knob.

For a quick reset, accelerate with

the accelerator pedal to the

desired speed, then press and

release the "SET/COAST" button.

Decelerating (While Cruise

Control System Is in Use)

Press and hold the "SET/COAST"

button to decelerate. Release the

button when you reach the desired

speed; the cruise control system

will be set to that speed. The

lowest speed to which the system

may be set is 25 mph (40 km/h).

When it is necessary to make a

quick reset, depress the brake

pedal. Press the "SET/COAST"

button when you reach the desired

speed.

The cruise control system cannot

be set to speeds below 25 mph (40

km/h).

Tap Up (While Cruise Control

System Is in Use)

Quickly turning and releasing the

knob at the "RESUME/ACCEL"

position with the cruise control

engaged allows you to "tap up"

the preset cruising speed. Each

turn increases the preset cruising

speed by one mile per hour (1.6

km/h). The preset cruising speed

can be increased by up to 10 miles

per hour (16 km/h) in this manner.

Comfort and Convenience Features

Summary of Contents for 2001 Passport






























































































































































































































































































































Search results

Summary of Contents for 2001 Passport

Reviews:

Honda 2001 Passport, Owner'S Manual, Page: 152 / 317

Search results

Summary of Contents for 2001 Passport

Reviews: