Honda 2001 Passport Owner'S Manual Download Page 137

Page: 137 / 317

AM/FM/Cassette/CD

Changer Stereo

Audio System

For EX-L model

Your Honda's audio system

provides clear reception on both

AM and FM bands, while the

preset buttons allow you to easily

select your favorite stations.

The CD changer holds up to six

discs, providing several hours of

continuous entertainment.
The cassette system features

Dolby B* noise reduction,

automatic sensing of chromium-

dioxide (CrO

) tape, and

autoreverse for continuous play.

* Dolby noise reduction manufactured under

license from Dolby Laboratories Licensing

Corporation. "DOLBY" and the

symbol

are trademarks of Dolby Laboratories

Licensing Corporation.

Operating the Radio

The ignition switch must be in

ACCESSORY or ON. Turn the

system on by pressing the

PWR/VOL knob. Adjust the

volume by turning the PWR/VOL

knob.
The band and frequency that the

radio was last tuned to is

displayed. To change bands, press

the AM or FM button. Press the

FM button again to switch

between FM1 and FM2. On the

FM band, ST will be displayed if

the station is broadcasting in

stereo. Stereo reproduction on

AM is not available.
You can use any of four methods

to find radio stations on the

selected band:

TUNE, SEEK,

SCAN

, or the

Preset

buttons.

TUNE

—Use the TUNE bar to

tune the radio to a desired

frequency. Press the right side

to tune to a higher frequency,

or the left side

to tune to a

lower frequency. The frequency

numbers will start to change

rapidly. Release the bar when the

display reaches the desired

frequency. To change the

frequency in small increments,

press and release the TUNE bar

quickly.

SEEK

— The SEEK function

searches the band for a station

with a strong signal. To activate it,

press and release the

SEEK/SCAN button. The system

scans up the band from the current

frequency. It stops when it finds a

station with a strong signal.

SCAN

— The SCAN function

samples all the stations with

strong signals on the selected

band. To activate it, press and

hold the SEEK/SCAN button until

Comfort and Convenience Features

Summary of Contents for 2001 Passport






























































































































































































































































































































Search results

Summary of Contents for 2001 Passport

Reviews:

Honda 2001 Passport, Owner'S Manual, Page: 137 / 317

Search results

Summary of Contents for 2001 Passport

Reviews: