Honda 2001 Passport Owner'S Manual Download Page 118

Page: 118 / 317

Be careful when you are using the

beverage holder. A spilled liquid

that is very hot can scald you or

your passengers. Spilled liquids

can also damage the upholstery,

carpeting, and electrical

components in the interior.

Sun Visor

The sun visor can be pivoted to

the side when unhooked.

Glove Box

Open the glove box by pulling the

handle.

The glove box can be locked and

unlocked with the ignition key.

Interior Features

An open glove box can

cause serious injury to your

passenger in a crash, even if

the passenger is wearing the

seat belt.

Always keep the glove box

closed while driving.

Summary of Contents for 2001 Passport






























































































































































































































































































































Search results

Summary of Contents for 2001 Passport

Reviews:

Honda 2001 Passport, Owner'S Manual, Page: 118 / 317

Search results

Summary of Contents for 2001 Passport

Reviews: