Honda 1996 Civic Sedan Online Reference Owner'S Manual Download Page 161

Page: 161 / 219

Lights

Replacing Rear Bulbs

(in Fenders)

1. Open the trunk.

Undo the fastener on the side of the
trunk lining by pushing on the center
of the fastener's head until it pops in.
Pull the lining off.

2. Determine which of the two bulbs

is burned out: stop/taillight/side
marker light or turn signal.

3. Remove the socket by turning it

one-quarter turn counterclockwise.

4. Pull the bulb straight out of its

socket.
Push the new bulb straight into
the socket until it bottoms.

5. Reinstall the socket into the light

assembly by turning it clockwise
until it locks.

6. Test the lights to make sure the

new bulb is working.

7. Reinstall the trunk lining.

Maintenance

▲

▼

Main Menu

Table of Contents

Summary of Contents for 1996 Civic Sedan




























































































































































































































Search results

Summary of Contents for 1996 Civic Sedan

Reviews:

Honda 1996 Civic Sedan, Online Reference Owner'S Manual, Page: 161 / 219

Search results

Summary of Contents for 1996 Civic Sedan

Reviews: