Audio System
Select the band you want to listen
to by pressing the AM or FM1/
FM2 button. You will see the
selected band and the frequency
in the display.
ST will be displayed next to the
frequency if the station is
broadcasting in FM stereo. The
AM stereo feature is not available.
You can use any of three methods
to find radio stations on the
selected band: TUNE, SEEK, or
the Preset buttons.
The TUNE function lets you find a
desired frequency. Push the right
side ( ) of the TUNE/SEEK bar to
change to a higher frequency, and
the left side ( ) of the bar to
change to a lower frequency.
To change the frequency up or
down a single increment, push
and release the TUNE/SEEK bar.
The SEEK function searches the
band for a station with a strong
signal. Depending on which way
you push the TUNE/SEEK bar, the
system searches up or down from
the current frequency. Push the
bar until you hear a beep, then
release it. The system searches
until it finds a station with a
strong signal, then stops.
Presetting
The preset buttons allow you to
store radio frequencies for later
selection. Each button will store
one frequency on the AM band,
and two on the FM band. To store
a frequency:
1. Select the desired band, AM
or FM. FM1 and FM2 allow you
to store two frequencies with
each Preset button.
Comfort and Convenience Features
ON/OFF/VOL
KNOB
AM BUTTON
STEREO
INDICATOR
TUNE/SEEK BAR
PRESET
BUTTONS
FM1 / FM2
Main Menu
Table of Contents
▲
▼