The right lever controls the wind-
shield wipers and washers. The
rotary switch at the end of the
lever has three positions:
INT - intermittent
LO - low speed
HI - high speed
In intermittent, the wipers
operate every few seconds. In low
speed and high speed, the wipers
run continuously.
To operate the wipers in mist
mode, push the control lever
down. The wipers run at high
speed until you release the lever.
This gives you a quick way to
clear the windshield.
U.S.
Models
To
clean the windshield, pull the
wiper control lever toward you.
The washers spray until you
release the lever.
Canadian Models
The wipers run at low speed
while you're pulling the lever,
then complete one more sweep
of the windshield after you
release it.
Instruments and Controls
Controls Near the Steering Wheel
Windshield Wipers
Windshield Washers
Main Menu
Table of Contents
▲
▼