Headlights
The rotating switch on the left
lever controls the lights. Turning
this switch to the first position " "
turns on the parking lights, tail
lights, instrument panel lights,
side-marker lights, and rear
license plate lights. Turning the
switch to the second position
" " turns on the headlights.
To change between low beams
and high beams, pull the turn
signal lever toward you until you
hear a click, then let go. The high
beam indicator will light (see
page
33
).
To flash the high beams, pull back
and hold the turn signal lever.
Release the lever and the high
beams will go off.
The high beams will stay on for as
long as you hold the lever, no
matter what position the
headlight switch is in.
Daytime Running Lights
Canadian Models
With the headlight switch off,
the high beam headlights come
on with reduced brightness
when you turn the ignition
switch to ON (II) and release the
parking brake. They remain on
until you turn the ignition off,
even if you set the parking
brake.
The headlights revert to normal
operation when you turn them on
with the switch.
Instruments and Controls
Controls Near the Steering Wheel
Main Menu
Table of Contents
▲
▼