Lights
2. Move the side marker light
assembly forward until it
slides out of the body.
3. Turn the socket one-quarter
turn counterclockwise to
remove it from the lens.
4. Remove the bulb by pushing it
in slightly and turning it
counterclockwise.
5. Install the new bulb in the
socket. Turn it clockwise to
lock it in place.
6. Insert the socket back into the
lens. Turn it clockwise to lock
it in place.
7. Turn on the parking lights to
make sure the new bulb
works.
8. To reinstall the light assembly
in the fender, line up the guide
on the assembly with the
metal tab next to the
headlight and line up the
fingers on the light assembly
with the holes in the fender.
Push the light assembly
straight back.
9. Install the mounting screw
and tighten it securely.
Replacing Rear Bulbs
(in Fenders)
1. Open the trunk.
2. Remove the cover from the
inside of the taillight assembly
by pushing on the tab.
3. Determine which of the three
bulbs is burned out:
tail/stoplight, turn signal, or
side marker. Remove the
socket for that bulb by turning
it counterclockwise.
Maintenance
COVER
LOCK TABS
Main Menu
Table of Contents
▲
▼