Honda 1991 Accord Sedan, Owner'S Manual, Page: 55 / 146

Stereo Sound System (cont'd)
Preset Station Selection
1. Make sure the Band Selector is on the band you want ... AM or
FM. Then, find the station you want by Manual Tuning or Seek
Tuning.
2. Press and hold one of the Preset Buttons.
3. In a few seconds, a beep will sound and the light in the button will
come on. The station is now preset in the memory. You may
preset 1 AM and 1 FM station per button. (total, 6 of each on the
LX model and 8 of each on the EX and SE models).
4. You can tune to a preset station by pushing its corresponding
preset button.
NOTE:
On the EX and SE models:
The Auto Select Button must be off before the Preset Station
Selection can be used.
Auto Select Button (EX/SE)
If you are visiting a new broadcast area, you can quickly enter into
memory the stronger stations in that area by simply pushing the
Auto Select Button. The radio will then automatically scan both the
AM and FM bands and temporarily memorize up to eight stations in
each. With the Auto Select Button on, these stations can then be
tuned by pushing the preset buttons. Manually-preset stations
remain memorized for use when you return to your normal
broadcast area, but are only selectable with the Auto Select Button
off.
Stereo Indicator
This lights up when a FM broadcast in stereo is being received. It will
flash when the signal strength diminishes. If it flashes, good stereo
reception cannot be expected. Stereo reception is available only for
FM stereo broadcasts, not for AM stereo broadcasts.